ROX Deluxe 2" Rise x 7/8" Stem Clamp x 7/8" Handlebar Pivoting Risers, Buell friendly The ROX Deluxe Adjustable Handlebar Risers fit any bike with 7/8" handlebar clamps and can work great as Buell risers for models including KLR 650, XR 650L, V-Strom, BMW 1150 and 1100 and even Triumph. We've lengthened the 7/8" diameter post and offset the top clamps to clamp over the knurling on the original handlebar, allowing proper clamping into the Buell's triangular handlebar clamps. Now, it's also easier to reach your original handlebar clamp bolts with a refined design you're sure to appreciate. This product is anodized clear and machined from 6061 T6 aluminum. Whether you ride on- or off-road, enjoy the comfort and increased control these handlebar risers can provide. * Adjustable Dual rotation points makes Rox Riser selectively adjustable forward and back, allowing you to fit your handlebars to your preferred riding position. Rox Risers allow you to raise your stock bars or use a motocross style bar. * Universal With its two piece design, Rox Riser will install on virtually any motorcycle that has clamps to hold the handlebars, making it incredibly universal. * Engineered and tested for maximum strength and durability. * CNC machined from billet 6061 T6 aluminum * Patent # US 6,920,806 BZ Notes: * Caution: First determine if you have adequate cable length before installing handlebar risers. I had no trouble installing the ROX Risers on my R1200GSA. Just move the cables from in front of the shock stems to the back of the shock stems (takes about 15 minutes). * Amount of extra cable length varies based on make and model * It is recommended that you consult your local dealer * Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables. * Caution: Neither Adventure Designs, LLC or Rox Speed FX are responsible for injury or death resulting from installation of this product. Thoroughly read and follow instructions. |